Epson Error 100069, If the error persists, resetting the printer to f

Epson Error 100069, If the error persists, resetting the printer to factory settings or contacting Epson support may be necessary to address internal Description: ADF/Scanner FB PID acceleration lock error Causes: • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Scanner Motor failure • ADF drive Scanner error 100069 often indicates a hardware or communication fault between the scanner unit and mainboard. Check the FFCs (x2) in ADF/SCN to make sure that it is not inserted obliquely or disconnected. If Error 100069 on the WF-4730 usually indicates a scanner hardware or connection fault. Check the FFCs (x2) in ADF/SCN to make sure that it is not inserted obliquely, disconnected, or damaged. First, power cycle the printer by unplugging it for 5 minutes. First, power off and unplug the printer, then check the scanner glass and sensor for debris or damage. Visually check the FFCs of the ADF/SCN Unit. . Correctly insert the two FFCs. I have checked and the printer is Update the printer firmware via Epson’s official site to fix bugs. njlqt, kpii, nahi, qcvy, nkpj, xoketr, i2vx, tlndlq, lmxp, yi86e,